in ,

Planting Bare-Root Fruit Trees and Vines

a young woman planting an Apple tree in the garden near the house . planting seedlings of fruit trees in the spring

Sharing is caring!

Bare root trees and vines are field grown, then dug during the winter when they are dormant. They are stored and shipped with all the soil removed from the roots–bare root.

Bare root trees and vines are usually less expensive than those sold in containers. Young trees and vines without soil weigh less and are easy to move. Planting a bare root tree requires less work on your part–heavy lifting is not required.

Bare root trees and vines must be planted soon after they leave their growing fields. With no soil around the roots, bare-root plants can dry out and die if left exposed to the air for very long.

Bare roots should be planted when the soil in their new home is moist and when the plant is not actively growing–by mid-spring before bud break, or mid-fall after leaf fall. Planting bare roots when they are dormant will allow them to get established and grow new roots before leaves begin to grow and before summer sun and drying winds arrive.

Get bare root plants in the ground as quickly as possible. While waiting for planting store bare roots in a cool place and keep the roots moist by covering them with damp mulch or wood shavings.

Tools for Vegetable Gardeners at Amazon:

When to plant bare root trees and vines

Bare-root fruit trees and vines can be planted at any time during their dormant season between leaf-fall and bud-burst–late fall to early spring–as long as the soil conditions are right and the ground is not too wet or frozen.

Frosty weather and freezes need not stop fruit planting as long as the soil surface is workable and fruit trees or bushes are planted into reasonably dry and unfrozen soil beneath.

In very cold regions, where temperatures drop below 0°F and where the ground freezes, plant fruit trees and vines in the spring so that roots are established before the next winter. In warm-winter regions where freezing weather is rare, plant in the fall or early winter.

Planting bare root apple tree.
Planting bare root apple tree.

Allow as much time as possible between planting bare-root fruits and vines and the hottest time of the year when plants can be most stressed. Time allows roots to become established and withstand extremes of temperature.

Bare-root fruit trees, bushes, and vines that can not be planted immediately should be kept in a frost-free shed or cellar. Be sure to cover the roots of bare-root plants with moist burlap or sacks to stop drying out or frost damage. Or, heel bare-root fruits into a temporary trench in a garden bed with their tops leaning over at an angle southward (to prevent sunburn) and the roots covered with well-packed moist soil for protection from drying cold. An 8 to 12-inch trench in a shady location is best.

Selecting bare-root plants

Choose bare-root trees and vines with well-developed root systems. These plants are usually two to three years old. Look for plants that have sturdy trunks or stems and well-spaced branches. Avoid plants with broken or dried-out roots or branches. Ensure success by purchasing healthy and sturdy plants that are clearly labeled and come from a well-regarded nursery or grower.

Preparing to plant bare roots

Planting holes are best prepared just before planting so that water cannot fill them. Keep topsoil and lighter-colored subsoil separate. The planting hole should be large enough that the roots can be spread out and fully extended. Dig a hole that allows the plant to sit at the same depth or just slightly deeper than it grew in the container or nursery. A hole 3 feet wide and 3 feet deep should be plenty large enough for planting bare-root fruit trees. For balled-and-burlapped trees or trees with root balls, dig a hole at least 6 inches wider in all directions.

If roots dry before planting, soak them in a tub of water or slurry of aged steer manure for a few hours before planting. This will plump up roots and prepare them for their new home. Be sure to trim away any broken root tips before planting. Large, older roots anchor plants. New fine roots absorb water and food. Root tips trimmed back by about ½ inch will grow new fine roots.

Bare root planting site

If you know well in advance where you intend to plant, prepare the site by tilling in plenty of well-aged manure and compost. A cover crop of green manure–annual rye, oats, clover, or other legumes–can be planted the season before. Test the soil before planting. Add lime if the soil is too acidic.

If the planting hole can be dug well in advance of setting out fruit trees and vines, fill the hole with aged compost and manure weeks or even months before planting. This will keep rainwater from sitting in the hole before planting and allow the compost and manure to decompose and enrich the soil.

10 easy steps to plant bare root trees and vines

  1. Remove wood shaving or packing material around the roots. Rinse and clip away any broken or dead roots.
  2. Soak the roots in a bucket of water for one to four hours–but not longer. This will allow the roots to plump up with moisture.
  3. Dig a hole at least two feet wider than the roots of the plant and half again as deep as the roots. You want the roots to flare out from the trunk when set in place. Be sure to loosen the soil on the sides of the hole to give the roots access to their new home.
  4. Add planting mix or compost to the hole and mound it into a cone whose top reaches just ground level. Set the bare root plant on top of the mound and cascade the roots down over the cone so that they flare out from the trunk.
  5. Face the plant’s graft union to the north or the shaded side of the hole. Fill the hole about halfway and tamp the soil lightly to remove large air pockets.
  6. Place a stake or support in place being careful not to harm the roots. Make sure the plant is standing straight up.
  7. Water in the roots to remove any remaining air pockets in the soil.
  8. Finish filling in the hole. Use extra soil to build a berm around the perimeter of the roots, and a basin to water the plant early on.
  9. Keep the soil moist for the first year after planting. Mulch to retain moisture but keep mulch back six inches from the trunk.
  10. Check the plant regularly and water to keep the soil moist but not wet.

Stake bare root plants before planting

Just before planting fruit trees, drive vertical stakes into the ground, so that the root system is not damaged. Stakes will hold tree tops steady, while roots become established. A stake 1½- or 2-inches square and 6 feet long should be sufficient for supporting fruit trees. Smaller stakes can be used for fruit bushes or vines. Allow for more movement by double-staking trees; trees that are allowed to move with breezes will develop stronger trunks.

Many small and dwarf fruit trees have small root systems and may require staking throughout their life. Trained trees and bushes–espaliers and cordons–also need life-long support.

planting bare root tree
Gardener planting an apple tree in to a prepared hole – variety is Bramley

Planting bare root plants

Mound the soil at the bottom of the planting hole to form a cone then spread the roots out over the coned mound. Re-fill the hole with a combination of topsoil and compost layer-by-layer. Add the subsoil back into the hole last; the richer topsoil goes back into the hole first. After each layer of soil covers more roots, give the plant a gentle shake to settle the soil around the roots. Firm the soil in as you go. Repeat the process until the level of the surrounding soil has been reached.

If the soil is wet and sticky–a sign of clay soil–be careful not to firm the soil is too hard. Wet, clay soil is easily compacted and the soil structure can be harmed. Where the soil is clay, add more aged compost into the planting hole to improve the soil structure. Where the sub-soil stays wet, it may be beneficial to raise the planting area by 2 feet or more by mounding the topsoil before digging the planting hole.

Conversely, if the soil is very loose and sandy or if you suspect the soil is not making firm contact with the roots, water in your soil mix to help settle the soil round the roots. Where soil is loose, place sloping stakes close to the tree and head the top of the tree towards the prevailing winds. Tie stakes firmly to the tree with plastic or rubber ties.

It is best to not add fertilizers to the planting hole–even organic fertilizers or amendments; they can cause root burn. If you do add fertilizers or amendments to the hole, place a buffer layer of soil over them before putting the plant roots in place. Fertilizer-rich planting soil can result in excess green or vegetative growth and delay fruiting.

Bare root planting depth

All fruits can re-planted at the same depth as they were in the nursery or nursery container–the nursery planting level will be distinguishable by a difference in the color of the bark or stem.

Plant dwarf fruit trees on grafted rootstocks so that the graft union– distinguishable as a swelling on the stem, usually just above where the roots grow out–is above the soil. This will ensure that the scion variety does not form its own roots and counteract the effect of the rootstock.

The graft union of standard-sized fruit trees can be planted 2 inches or so below the soil level. This will protect the union from extreme weather and ensure that the tree is well anchored.

When planting situate the tree so that the bulk of the tree’s roots, the graft union, and the lowest scaffold branches point toward the prevailing wind. This will reduce the possibility of tree damage in high winds.

Where there is a prevailing wind, plant trees so that the strongest shoots grow into the wind. This will ensure the formation of a more balanced tree.

Water and mulching bare root plants

Water in the roots at planting time to make sure the soil makes good contact with the roots. Give new plantings a deep soaking once a week. Allow the water to soak deeply into the soil. Roots will follow deep watering downward to help firmly anchor the tree. Avoid light and shallow watering which will result in shallow rooting.

Add a mulch of compost or leaf mold around fruit trees and vines to keep the soil from drying out. Add 2 to 4 inches of organic mulch–compost, dried leaves, or straw–around the base of each plant. Pull the mulch just away from the trunk or stem of the plant in spring to avoid bark rot. Place hardware cloth mouse guard around the tree to keep rodents from hiding or feeding under the mulch.

Prune bare roots after planting

Prune fruit trees after planting. Usually about half of a tree’s roots are left behind when lifted for transplanting. To compensate for root loss, an equal or near equal part of the tree top should be pruned back. This will slow evaporation from leaves and keep the plant from drying out while new roots grow.

If the tree is a whip with no branches (a tree that is about a year old), cut back the top third. If the tree is branched, first remove any branches growing from the trunk or main stem (called the leader) at an angle of less than 45 degrees. (Vertical branches growing at 45 degrees or less will form weak crotches that can split or break at the time of heavy fruiting.) Three to five strong, horizontally growing branches should be retained along with the leader. These are called scaffold branches. Scaffold branches should be radially distributed evenly around the tree.

Head back the leader to a length of about 3 feet for fruit trees like peaches, nectarines, and apricots and plums which do best with an open center.

Make pruning cuts just above buds facing to the outside of branches; this will ensure new growth is outward and not inward to the center of the tree. Be sure to prune out all broken and dead branches and twigs first. Apples and pears planted in late spring should not be pruned until the autumn.

For fruit bushes and vines, cut back the plant’s top growth by half at planting time to balance the upper growth and roots. Dormant shoots can be cut away at any time between leaf-fall and bud-burst in spring, except during periods of hard frost.

Protect newly planted bare-root trees

Keep weeds and grass back from newly planted trees and vines. This will eliminate competition for water and nutrients. Mulch outward from the stem or trunk to the drip line. Where winters are harsh a 4- to 6-inch layer of compost, straw or well-rotted manure will help protect plants from cold temperatures. Be sure to pull mulches back from stems and trunks in spring.

Tree wrap–stretchable, weatherproof paper–or burlap can be wrapped around tree trunks in winter to insulate plants. A burlap windbreak constructed of four stakes with burlap run between them or a cylinder of chicken wire loosely filled with straw or dried leaves will protect new plantings in winter.

A hardware cloth tree guard will keep mice and rodents from over-wintering near planting or eating bark.

When spring comes, newly planted trees–particularly young whips–can be protected from sunburn and insects with a water-based whitewash or white interior latex paint coating. The trunks or stems of young trees should be painted in early spring before buds begin to swell. The whitewash will gradually fade away as the tree grows.

Related articles:

Planning the Home Fruit Garden

Home Fruit Garden Maintenance Calendar

Garden Planning Books at Amazon:

Written by Stephen Albert

Stephen Albert is a horticulturist, master gardener, and certified nurseryman who has taught at the University of California for more than 25 years. He holds graduate degrees from the University of California and the University of Iowa. His books include Vegetable Garden Grower’s Guide, Vegetable Garden Almanac & Planner, Tomato Grower’s Answer Book, and Kitchen Garden Grower’s Guide. His Vegetable Garden Grower’s Masterclass is available online. Harvesttotable.com has more than 10 million visitors each year.

How To Grow Tips

How To Grow Tomatoes

How To Grow Peppers

How To Grow Broccoli

How To Grow Carrots

How To Grow Beans

How To Grow Corn

How To Grow Peas

How To Grow Lettuce

How To Grow Cucumbers

How To Grow Zucchini and Summer Squash

How To Grow Onions

How To Grow Potatoes

Ripe pears on a tree

How to Plant, Grow, and Prune a Pear Tree

Cover Crop Buckwheat

Cover Crops and Green Manure for the Vegetable Garden